DUA PULUH TAHUN KEATAS
Yang tidak cukup umur tinggalkan web ini
Yang sudah cukup umur untuk memulai klik gambar diatas atau
Gadisnya link warna biru


How could a welder made in 1939 be out on a pipeline today?
You may think that 6G welder is welding those pipe joints up with some fancy computer controlled welding machine, and you'd be wrong in most cases. Good old fashion stick welding like great grandpa did in World War ll is still the dominant process. Yes, the new pipe welding machines have electronic controls and other fancy stuff, and they have aluminum windings - and sure, they are out on the pipeline - mostly Lincoln brand, and the rest are Miller. However, on most pipelines these are stick welding machines.

It is possible that you'll find a machine that pre-dates WW ll out on a pipeline in 2012. Why and why stick? Stick is easy to transport, set up, and it is tough. Stick welders can weld in a breeze. Other welding processes use a shielding gas, so they can't weld in any wind. Stick welders don't break down much - they are so simple. Stick is an extremely strong process.

What about the machines?

Although there are some pretty snazzy modern stick welders out on the pipeline, you'll also find the Lincoln SA200 Pipeliner. You'll see some made in the 60s and 50s, and once in a great while, as far back as 1939. Why? The Pipeliner SA200 welders are great machines. Heavy copper windings make for a smooth arc. They are built like a brick porta-potty, so they run and run.

Modern machines are made with aluminum windings. As the windings get warm the electrical resistance increases, so the machine must be adjusted. When the welder takes a break and comes back, they must be adjusted again. An old SA200 with copper windings doesn't have this problem, so it welds on the same setting all day long, no matter what - they always weld like butter.

WARNING:
The world of Lincoln SA200 welders is an interesting one. Lincoln wound some of them in the 1970s with aluminum, but went back to copper with the Pipeliner Classic Series ll. Stay away from aluminum if you're going to get a Pipeliner.

Later model Classic units are diesel. The high cost of fuel makes this matter. IF you are running a rig 12 hours a day, diesel can make a big cost difference because diesel cost less to operate. However, a gas model will be less expensive to buy.
DUA PULUH TAHUN KEATAS
Yang tidak cukup umur tinggalkan web ini
Yang sudah cukup umur untuk memulai klik gambar diatas atau
Gadisnya link warna biru


Here are my 11 suggestions for getting a job as a pipeline welder:
  1. Spend several hours researching welding forums searching on terms like "pipeline jobs", "pipeline welding", and "pipeline welding certification test." You need to get a feel for the pipeline welding industry.
  2. If you still want to go for it, decide whether you want to joint a union or go the non-union route. (this is a subject for a whole article all by itself)
  3. If you want to be a union pipeline welder, contact the pipeliners local 798 in Tulsa,OK and let them guide you or change your mind.
  4. If you decide to go the non-union route, search job websites like monster and careerbuilder for terms such as "pipeline welder" or "pipeline welding."
  5. Learn the welding test requirements by hook or by crook. Call the test supervisor and learn the welding test criteria. Every contractor is likely to administer different welding tests. For example, some require the pipeline welder to cut,bevel, and weld a typical connection. It has been my experience that some weld test supervisors are just looking for a way to fail you. Other weld test supers will actually give tips and advice. Every job is different and there is no one single welding test that is the standard. That is just the way it is.
  6. Find a way to practice the test on mock ups that exactly represent what will be required. Practice enough to have confidence that you will be able to pass the welding test.
  7. Arrange a pipeline welding test date and show up early.
  8. Do not, I repeat ...Do not be cocky or arrogant. The test shop supervisor has you by the short hairs. This is the time to give him the respect he deserves as test shop supervisor and to say yes sir and no sir.
  9. Ask questions. For example, Can I use a grinder? Will you fail me for grinding too much? Do you need to inspect the fitup? root pass? hot pass? Learning what will fly and what will not is crucial to passing the welding test.
  10. Take your time unless there is a time limit. Relax and try not to be nervous. Keep all arc strikes and grinder marks within the bevel. Weld the joint or joints and chip brush and grind anything that needs it. (if allowed)
  11. Pray. You might want to do this one first.

DUA PULUH TAHUN KEATAS
Yang tidak cukup umur tinggalkan web ini
Yang sudah cukup umur untuk memulai klik gambar diatas atau


Pipeline welding jobs are usually partaken in because welded pipes play an essential part in the completion of many industrialized projects. Ever wondered what it is like to partake in these types of jobs, and what kind of living you can achieve? We are going to cover what pipe welding jobs entail and how much of a living you can expect from it.

Pipeline welding jobs require intense dedication, and focus when it comes to completing the task at hand. This isn't a job for slouches, and the pipes you weld are usually evaluated and inspected, to ensure that the work you do, is of high quality.

There are many locations in which people partake in pipeline welding jobs. Oil refineries, chemical plants, power plants, tunnels, and in a variety of outdoor environments are just a few examples. Also, as a pipe welder, you will be exposed to varying weather conditions while you work in the field. These weather conditions range from cool, to very harsh in extreme cases. To top it off, you will usually be working for many hours at a time.

Welders partake in several processes to ensure that the metals are merged. Certain processes, are better suited to certain types of jobs than others would be. When it comes to pipeline welding jobs, most welders favor the shielded metal-arc welding (stick welding) process, and the gas tungsten arc welding (tungsten inert gas or "tig" welding) process for their pipe joining purposes.

You also have what is referred to as positions with regard to pipe welding. You will only be allowed to weld in the positions, and to the specifications in which you are certified to weld. The positions in pipe welding, refer to the positions of the pipe. There are four positions and these are 1G, 2G, 5G and 6G. There is no 3G and 4G position in pipeline welding.

The 1G position is known as the horizontal rolled position, in which the pipe is horizontal and rolled. In the 2G position, the pipe is placed vertically and welding is done horizontally. The 5G position is known as the horizontal fixed position, in which the pipe is horizontal, but it isn't turned or rolled during operation like the 1G pipe position. The 6G position has the pipe set up on a fixed (can't be rolled or moved during welding operation) 45 degree incline.

With regard to wages or salaries in pipeline welding jobs, being certified in the 6G position will yield maximum returns. Significantly more than being only certified in the other positions. This is because the 6G position is the most difficult of the four, and has you welding in all positions. Due to this, being certified in 6G, also qualifies you to weld pipes in 1G, 2G, and 5G. Being very active in pipeline welding jobs, can put you on the brink of a six figure annual income, and in many cases achieve it.

As you can tell, there is a lot of work involved when you partake in pipeline welding jobs. It is not a lazy man's job. Is it worth it? Well, once you are a hard worker, you act professional (like most jobs, you will encounter your fair share of hostile co-workers) no matter what, and your welds are at high enough quality to get through the evaluation process, you should have a bright future welding pipelines. Why not give it a go and try to improve your standard of living?